You are here: >Home >Installation
   
 
Rawstone Kitchens & Bathrooms
 
  For a gas hotplate, overhead must be minimum of 700mm for bench top.
Rawstone  Kitchens, Bathrooms & Laundries
Perth Home Renovation Specialists
Installation

Flush mounted and under bench ovens with front panel exhausts

Many ovens do not have "Baffle" fitted surrounding the oven door, and the excessive heat from oven doors affect the cabinets and doors.

Thermo laminated doors meet current ATLA & European Standards for heat resistance (UNI9242)
to withstand 70°C for 4 hours. Heat above this can make the foil peel back from the door/panel.

Heat deflector strips are available to be installed for ovens of this nature
(see diagrams below).

When installing gas hotplate, overhead must be minimum of 700mm for bench top. Rangehood must be in use at all times. All heat radiated appliances must not be used directly under overhead doors.


go to
Check out these pages:

Terms & Conditions

Installation
Qualiform installation instruction
Heat deflector strip installation.
Note, failure to install heat deflectors in either method voids the warranty.
Rawstone
Kitchens & Bathrooms


Unit 2 / 3 Langar Way
Landsdale WA 6065
Phone: +61 8 9302 1951
   
email info@rawstone.net.au      top of page Top      go to Bookmark this Website                                                               Find us on Facebook Find us on Facebook
© Rawstone Kitchens & Bathrooms Pty Ltd                                                                                                                      Privacy Statement | Disclaimer | Sitemap